When searching for RFM95W-868S2R, a buyer usually needs three answers: is this the exact BOM code, will it fit the existing wireless system, and what must be agreed before ordering? This guide separates document checks, photo interpretation and sample acceptance so procurement and engineering can approve the same requirements.
View RFM95W-868S2R product details and sourcing options. Confirm price, available quantity, packaging and estimated shipment in the actual quotation.
What is RFM95W-868S2R? Module versus chip
RFM95W is part of HOPERF’s low-power long-range transceiver module family. The manufacturer’s V2.0 datasheet lists RFM95W-868S2 as an 868MHz SMD version and describes an SPI host interface. It is a module with RF circuitry and supporting components; do not plan it as a standalone application MCU. See the manufacturer datasheet, pages 11 and 122.
This article targets the full RFM95W-868S2R code shown on the supplied label and WOMAiELEC product page. The reviewed manufacturer ordering table ends at RFM95W-868S2 and does not separately explain the final R. Retain the complete suffix and request written confirmation of packaging and version correspondence. Do not assume that R establishes a particular reel quantity or functional grade.
Six checks before placing an order
Check | Question for engineering | Record to retain |
|---|---|---|
Exact code | Is only RFM95W-868S2R approved, or are other suffixes acceptable? | Approved BOM and suffix explanation |
Band and destination | What channels, peer equipment and deployment region apply? | Frequency plan and applicable requirements |
Host and protocol | SPI driver, reset/interrupt wiring, point-to-point or LoRaWAN? | Firmware version and interface allocation |
Power | Supply and logic levels; voltage and current margin during TX? | Power waveforms and approved conditions |
Antenna and enclosure | Which antenna, RF connection, enclosure and installation? | Antenna code and final system configuration |
Packaging and acceptance | Quantity, lots, labels, packaging and test scope? | Quotation, sample report and acceptance agreement |
1. Do not approve 868MHz and 915MHz versions as software-only substitutes
The manufacturer lists separate 868 and 915 ordering versions. Similar appearance does not establish interchangeability. Have engineering assess the proposed module, peer device, antenna and existing firmware together, rather than only checking whether software can set a frequency.
For export projects, establish the end-product deployment region and applicable radio requirements first. An “868” suffix does not replace system compliance assessment. Device capability is not permission to transmit at any power in any region.
2. LoRa support is not a complete LoRaWAN end-device solution
LoRa is a radio physical-layer technology; LoRaWAN adds network protocol, device parameters and security mechanisms. The LoRa Alliance developer resources explain these layers. Start by asking the project owner whether the application uses point-to-point communication or a LoRaWAN network.
For point-to-point projects, request the approved firmware and radio configuration for both ends. For LoRaWAN, have development confirm the stack, provisioning and network integration plan. Purchasing a module does not establish that application firmware, connectivity service or a certified complete end device is included. Separate those deliverables in the RFQ.
3. Why check power and antennas beyond one successful packet?
The manufacturer describes typical 3.3V conditions and a maximum +20dBm mode with additional operating restrictions. Read limits for the selected mode and revision, rather than applying headline numbers to every configuration. A low-power project also needs a TX power-integrity check, not only a sleep-current figure.
Ask engineering to record voltage at the module under the final power supply, routing and load conditions, looking for resets or packet loss. For battery life, assess a complete cycle: wake, measurement, transmit, receive or retry, and sleep. Then evaluate the actual battery and temperature conditions.
A range requirement should contain more than a distance in kilometres. Record antenna, mounting height, enclosure, obstructions, payload and receiver settings in the sample plan. Count transmitted and received packets under one controlled configuration. Those results provide a basis for comparing samples or design changes; an advertised distance is not a delivery promise for the customer’s site.
4. How should buyers read the module and packaging photos?
The module photo illustrates component layout. The supplied packaging label shows RFM95W-868S2R, quantity 1000 and Oct-18-2024. That is the date printed on the photographed label, not an independently verified semiconductor manufacture date. The quantity describes that label, not current inventory or universal standard packaging.
The central IC has a visible “RF96” marking. IC top marking and complete module ordering code are different identification levels. That marking alone cannot establish the module variant or authenticity. Compare the actual goods, labels, purchase order and supplier documents together. Obtain a written explanation of discrepancies and apply agreed tests instead of deciding from one photograph.
5. Sample acceptance: turn “it communicates” into repeatable criteria
Documents: record complete code, lots, photos, quantity and supplied records. Resolve discrepancies before approving that lot.
Interface: check initialization, reset, interrupts and sustained traffic using the approved board and firmware. Save the configuration.
Radio: fix both ends’ settings, payload and packet count; record losses, retries and environment.
System: cover planned operating conditions using the final antenna, enclosure and power supply; observe power-cycle recovery.
Production: associate results, firmware, acceptance limits and approval with the BOM before committing to volume purchasing.
This is a proposed validation framework, not a statement that WOMAiELEC has performed these tests on the pictured goods. Agree on methods, equipment, sample size and pass criteria before ordering.
6. RFM95W-868S2R RFQ checklist and product link
Provide the complete RFM95W-868S2R code, sample/pilot/production quantities, destination, required arrival date, packaging and lot requirements, and whether only the approved code is acceptable. If alternatives may be considered, include the engineering-approved change scope so a similar name is not treated as authorization.
View the HOPERF RFM95W-868S2R product page or send an RFM95W-868S2R sourcing inquiry. Organize the host MCU, power parts and connectors through the BOM sourcing page. Supply terms require separate confirmation.
Frequently asked questions
Can RFM95W-868S2R plug directly into USB?
Do not treat the bare module as a finished USB device. Have engineering confirm the host, supply, interface board and firmware before ordering supporting parts.
Can it directly replace another LoRa module?
LoRa support and the same band are insufficient. Review mechanics, pins, supply, RF path, driver, protocol and the impact on existing approvals, followed by engineering validation.
Does the photographed label prove that 1000 units are available today?
No. A photo records the label being photographed. Confirm available quantity, lots, packaging and lead time in the current quotation and shipment records.
References
HOPERF RFM95W/96W/98W V2.0 datasheet, particularly interfaces, operating conditions and ordering information; LoRa Alliance developer resources. Reviewed November 14, 2026. Purchasing checklists and test steps are recommendations; final selection requires applicable manufacturer documents and project validation.
